Pillow packing machine working principle details
Pillow packing machine working principle details:Newly installed machinery in use a week must be on the transmission and moving parts to check the fastening, the product is advancing with The Times, it is now applicable to a wide range of human needs, and science and technology is the fundamental to promote the continuous progress of products. The product has been constantly transformed and its performance has been greatly improved. The following is the introduction of relevant knowledge of the product:
How should pillow packing machine be maintained?
1. After the machine is shut down, the cutter and tailstock should be cleaned in time, and the feed conveyor chain and transmission chain should be cleaned in every shift to prevent corrosion.
2. For the heat seal body, it should be cleaned frequently to ensure clear seal texture.
3. The photoelectric tracking luminous head, also known as the electric eye, should also be cleaned regularly to ensure the small error of the cursor tracking.
4. The scattered materials on the tray should be cleaned in time to keep the parts clean.
5. Regularly clean the dust in the electric control box to prevent bad contact and other faults.
Next is lubrication, there are a variety of different metal parts inside the machine, so the need for lubrication, timing to the packaging machine gear mesh, bearing oil hole and the moving parts of oil lubrication, so that can ensure the flexibility of the operation. When adding lubricating oil, please pay attention not to drip oil on the transmission belt, in case of skidding loss or belt aging damage.
Tips: pillow packaging machine products are widely used, human progress and the development of science and technology can not be separated from, but also led to the continuous improvement of product performance. Now the manufacturer that produces a product is all over the place, so when buying, need to undertake sufficient understanding hind affirms again.